Having leakage in your washer can make your laundry room terrible and flooded with water. In today’s article, we will discuss the reasons and solutions for the washer leaking from the bottom.
Reasons and solutions for washer leaking from bottom
Generally, a washing machine that is leaking from the bottom can cause significant damage to your laundry room by making it flooded. In most cases, the leakage in the washer is caused by a damaged drain hose, faulty drain pump, broken or damaged door seal, or a worn-out tub-to-pump hose.
The washing machine is considered one of the most essential household appliances that are found in almost every house.
The main objective of having a washing machine is to reduce the human effort when washing the clothes and complete the operation quickly. Due to prolonged use, a washing machine can have some issues that can cause a lot of problems.
One of the common issues that can be caused by a damaged washing machine is the washer can start to leak water from the bottom.
Having a washer that is leaking from the bottom can cause significant damage to the laundry room as it can flood the room completely.
In addition to that, if you do not fix the washer that is leaking, it can disrupt the washer’s optimum performance and reduce its longevity.
You need to fix the washer that is leaking from the bottom immediately to prevent the washer from being unusable permanently. In most cases, you can notice the washer leaking from the bottom front when you’re washing your clothes in it.
The problems can remain underneath the washer due to a loose or punctured drain hose. In addition to that, you can also notice the washer leaking from the bottom when filled with clothes or detergents.
There are two different types of washers available, and both of them can leak from the bottom. Below is a brief discussion on the reasons and solutions for different types of washers leaking from the bottom:
Front-load washer leaking from bottom:
Damaged door seal:
One of the main reasons why the front load washer may start leaking from the bottom is because of a damaged door seal.
In addition to that, the leakage must have started during the washing cycle, so there is a high possibility that the water has dripped from the door and accumulated on the surface.
In this situation, you need to inspect and observe the door sill to check for any damage or leakage in the door seal and repair it immediately. Repairing the door seal will hopefully fix the issue.
Safety air vent:
Almost all the washers consist of a safe air wind that helps to pass away the air from inside the washer easily. If the safety air vent is damaged or blocked, it will not be able to pass away the air from inside the washing machine.
As a result, due to the air pressure, the water may start to leak and accumulate on the surface. Consider that you need to check the safety air vent and make sure it is not blocked.
Failed drain filter:
Sometimes the washer drain filter may fail and not work properly. In that case, the washer will not be able to drain excess water from it properly.
Due to the presence of excess water, the drain filter may fail and the washer may leak water from the bottom. In that case, you need to repair the drain filter or replace it with a newer one to sustain the performance of your washer.
Top load washer leaking from bottom:
Damaged drain hose:
The washing machine consists of a drained horse that is one of the most essential parts of the washer. If the drain hoses are damaged, they will not be able to pass all the water from inside of the washer and accumulate underground.
That is why you need to check the external and internal drain hose to see if it has any leakage or puncture.
Generally, the drain holes often become damaged if the washer is pushed too close to the wall. Due to the vibrations from the washer, it can spill water on the ground. That is why you need to check and repair the drain hose if it is damaged.
Another common reason that can cause the top load washer to have leakage coming from the bottom is a damaged drain pump. Generally, a faulty drain pump will cause the washer to excessively shake when washing clothes.
As a result, there’s a high chance that the drain pump can cause the water to spill and accumulate in the ground.
That is why you should check the drain pump when the washer is leaking from the bottom and repair it immediately to sustain the performance of the washer.
Sometimes, due to prolonged use of the washing machine, your washer dispenser can easily get blocked with detergent residue, which can cause leaking from the bottom.
This usually happens when you use too much detergent in the washer for cleaning your clothes.
In addition to that, there’s a chance that the dispenser could also have a crack that is causing the leak in the washer from the bottom.
In that case, you immediately need to check the soap dispenser and repair it if it has any cracks or damage.
In addition to that, if the soap dispenser has any detergent residue, you immediately need to clean it to prevent leakage in the washer.
Hopefully following these steps will help you to get rid of the washer leaking from the bottom and extend the lifespan of your washer significantly.
Is leaking from the bottom common in a washing machine?
A washing machine is a frequently used household appliance in almost every house. Due to prolonged use, the washing machine can have some significant issues.
To sustain the performance of a washing machine, you need to maintain the condition of the washer regularly.
As a part of the maintenance, you should check all the components that are related to the washer and fix them if they are damaged or blocked. This will help you to increase the lifespan of the washing machine.
Leaking from the bottom is very common in the washing machine as it can happen due to faulty drain pumps or hose pipes. However, you can easily fix them by repairing or replacing them with a newer one.
How much does it cost to fix a leaking washer?
The washing machine is considered one of the most essential household appliances that are used to clean clothes. Due to prolonged use, the washing machine may have some damage or leaks in its components.
Running the washing machines with these damages can disrupt the optimum performance of the washing machine and reduce its lifespan.
That is why it is recommended to repair the washing machine components that are faulty to sustain the performance and quality of the washing machine.
Preparing the washing machine that has a leaking issue is a bit expensive, but it is completely worth every penny. This is a brief discussion on how much it cost to fix a washing machine that has a leaking issue:
LG washing machine repair costs should vary from $225 to $300. However, the warranty might cover the repair if you purchase the appliance within the last 10 years.
The average cost of repairing a Samsung washing machine should be between $225 and $325.
The average repair cost of a whirlpool washer should be 250 to $500.
The average cost of repairing a bigger washer should not be more than $100.
The repair cost of a Maytag washer should be between 150 to $400 including the labor cost.
It takes around 75 to $200 to repair a GE washing machine. This cost may include the labor cost as well.
Is it worth fixing a leaking washing machine?
The washing machine is one of the most essential household appliances that is used to reduce human effort and wash clothes quickly. Generally, the washing machine is an appliance that is used very frequently.
Due to the prolonged use of washing machines, it can have minor problems with some components. Although repairing the components of the washing machine may cost a little bit, they are worth every penny.
Repairing the washing machine will extend its life span and longevity. It will help to sustain the performance of the washing machine.
That is why experts recommend fixing the leaking issue for the washing machine to extend its longevity.
Due to prolonged use, a washer may have minor component issues and this can lead to accumulation underneath the washing machine. The leakage issue can easily be repaired by replacing the component or repairing it. Repairing the washer components may take a few 100 dollars.