The washing machine is considered one of the most essential household appliances that are available in most houses. In today’s article, we will discuss the reasons and solutions for washer leaking from the top.
Reasons and solutions for washer leaking from the top
If you’re having issues dealing with a top load washer that is leaking from the top, it may be caused due to a clogged overflow tube. Generally, the clogs can occur due to existing suds that are caused by using too much detergent or combining laundry products inappropriately inside the washer.
The washing machine is considered a daily needed household appliance that is found in almost every home. It is used to clean clothes and reduce human effort.
The washing machine always requires high maintenance to keep the machine running properly and sustain its performance.
Sometimes if any component of your washing machine gets damaged or clogged, it can cause a puddle in the laundry room. Generally, the presence of water inside the laundry room indicates that the washing machine is leaking.
Although some mean a minor problem that can be repaired, others can be very difficult to figure out.
Whenever you notice that the washing machine is leaking from the top or the bottom, you need to investigate and repair the washing machine before it causes a flood inside the laundry room and causes further damage.
Below is a brief discussion on the reasons and solutions for different types of washers leaking from the top:
Front-load:
Overload inside the washer:
Every washer comes with a different capacity that can indicate the amount of load it can take to wash the clothes.
If you overload a washing machine, it can end up leaking water from inside the washer. In that case, you need to reduce the amount of load you put inside the washer.
Damaged door seal:
Every washer comes with a door seal that protects the washing machine door from leaking water outside the washer.
If the washer has a dirty or damaged door seal, it will cause a leak from the front of the washer. If you notice any damage or leakage in the door seal you need to repair it immediately.
Broken drum seal:
One of the common reasons why the front load washer can have leakage is due to the oversudsing that can lead to a broken drum seal. If you notice this type of unusual case, you need to repair it immediately.
Top load:
Clogged overflow tube:
Having a clogged overflow tube can cause leaks at the front of a top load washer. This can happen from excess suds, caused by using too much detergent or combining laundry products.
That is why you should avoid combining laundry products and avoid using excess detergent to Prevent the issue.
Unleveled washing machine:
In some cases, you may need to check the ground on which you have placed the washing machine.
If the ground is not a flat surface, it will cause the water to come out from the top load washer easily. That is why you should always be careful when placing a washer.
Hole in water pump:
Sometimes having hoses in the water pump of your washer can cause the washer to leak unnecessary water from it. That is why if you notice any leaks on the water pump, you immediately need to repair the water pump to prevent a large issue.
Drain plug not removed:
Most washing machines consist of a drain plug that should be removed when in operation. If you do not remove the drain plug from the washing machine it can cause an overflow inside the washing machine and a leak of the water.
That is why you need to check and inspect the drain plug and remove it if it hasn’t been removed yet.
Is leaking from the top common in a washing machine?
A washing machine is considered one of the most essential household appliances that people tend to have in their house. It is very helpful to reduce human effort in washing clothes.
It is important to maintain the washing machine by making proper use of it and taking care of the components related to the washing machine frequently.
Leaking can be considered a common issue if the washing machine hasn’t been maintained properly. In addition to that, the washing machine components can get clogged and cause leaks very easily.
Other possible reasons and solutions for washer leaking:
Due to prolonged use, many components of the washing machine can easily get damaged or leak.
So, you need to take proper care of the washing machine components and inspect them regularly to check if there is any issue going on with the washing machine.
The washing machine leaking issue is very common and happens to many washing machines as different types of materials can decorate the drain hoses or water pump.
In addition to that, there are a variety of issues that can cause the washer to leak. If you do not fix the issue or repair the components that are damaged, the general performance of your washer will be disrupted significantly.
Below is a brief discussion on possible reasons and solutions for washer leaking:
Valve failure:
One of the common reasons that can cause the washer to leak water is valve failure. Sometimes, if you notice that the washer drips water or fills the water when it’s not turned on, it may be caused by the valve that is situated at the back of your washer.
Blocked dispenser:
Every washing machine consists of a dispenser that can be blocked due to prolonged use.
That is why you need to inspect and observe this condition of the dispenser and clean them to prevent the issue which will eventually help to balance and sustain the performance of your washer.
Damaged hoses:
One of the main reasons that can cause the washer to leak is damaged horses and gasket. These are very common components that can often get damaged and need to be replaced.
You can easily replace them to prevent the leaking issue of your washer easily.
How much does it cost to fix a leaking washer?
The washing machine is one of the most essential household appliances that need to be maintained properly to help sustain its performance. Due to prolonged use, the washer can easily get affected by a variety of problems.
In some cases, the components may get damaged very easily. That is why you need to inspect and observe the components of the washer and repair them if needed.
If any components of a washer get damaged and cause leaking, it requires a specific amount of money to fix the particular component.
That is why it is better to fix and repair the damaged components of your washer to get rid of the leaking issue immediately.
This will help to sustain the performance of the washer and help to ease human effort easily. Below is a brief discussion on how much it costs to fix a leaking washer of different brands:
LG:
Average repair cost of an LG washer that has leaking issues costs around 225 to 300 dollars.
Samsung:
Generally, the average repair cost for a Samsung washing machine that has a water leaking issue should cost around $225 to $325, including the labor cost.
Whirlpool:
Depending on the damage to the component, the average cost of repairing a wash Whirlpool washer should cost around 100 to $600.
Beko:
The average cost of rebuilding a bigger washing machine that has water leaking issues should cost not more than $100.
Maytag:
Generally, the average cost of a Maytag washer that has water leaking issues should cost not more than $200. You can simply call a technician to repair the washer.
GE:
Generally, the GE washing machine that has a leaking issue should cost around $125 to $400 depending on labor cost.
Is it worth fixing a leaking washing machine?
A washing machine is quite an expensive household appliance that requires proper maintenance to sustain its performance. Due to prolonged use, the washing machine can have different types of problems and even can cause a leaking issue.
Although it takes around a few $100 to repair the leaking washing machine, it is worth repairing it.
Because repairing a leaking washing machine will eventually extend its life span and sustain the performance of the washer.
That is why you should immediately repair the washer that has a leaking issue to get maximum efficiency from the washer. It is highly recommended to return the washer under the supervision of a technical expert.
Final Thoughts
Generally, it is very common for the washer to have a leaking issue if it has a clogged overflow tube or hole in the water pump. That is why, you need to repair the washer immediately, under the supervision of an expert mechanic to sustain its performance and extend its lifespan.