Skip to Content

Whirlpool Dishwasher Not Filling with Water: How to Fix?

Every once in a while, you may be experiencing some difficulties in filling your dishwasher with water. This is not uncommon in the case of Whirlpool dishwashers as well, despite being one of the most prominent brands in the market. 

You will need to take care of the dishwasher in order to run smooth operations. 

In this article, we will help you figure out why your Whirlpool dishwasher is not filling with water and what you can do to fix it. Read ahead to learn more about it. 

Whirlpool dishwasher not filling with water

It may be a common issue with an old dishwasher. There may be different reasons at play. Such as, the water supply hose may be damaged, the water inlet valve may have sustained some cracks, malfunction in the door switch, and so on. You should get the parts of the unit checked in such a case. 

When there are some issues with the water supply in your dishwasher, you should check all the parts associated with supplying water to the unit. In order to ensure that the machine is running smoothly, you should ensure regular maintenance. 

Otherwise, if it sustains damage in any of its crucial parts, the machine will not be able to run or fill with water properly. If you notice that your whirlpool dishwasher is having trouble filling with water, you should check for a few reasons that may be causing the issue. 

Read ahead to learn more about the reasons that are likely to cause such a malfunction and what you can do to fix it. 

Faulty water supply hose: 

One of the most common reasons why your Whirlpool dishwasher may not be filling with water is an issue with the water supply hose. So you should check out this issue first and foremost. 

If you notice that your dishwasher is acting up, it is likely that the water supply hose is damaged, cracked, or somehow clogged. 

You should firstly make sure to check the water supply hose thoroughly. Even if it looks fine on the outside, try to pass some water through it. If there are clogs on the inside, passing water through the hose will give the issue away. 

Solution:

If you find that there are issues with the water supply hose, you may have to replace the hose entirely. If there are small cracks or damage on the surface of the hose, you may simply use some tapes on it in order to cover the leak. 

However, if you are dealing with an old unit, then we would recommend you ask a professional to replace the hose and fix a new one for you. This should solve the problem and keep you worry-free for a long time. 

Water inlet valve malfunction: 

Another common reason that may cause your whirlpool dishwasher to not fill with water is that there are some faults with the water inlet valve. This part is responsible for controlling the water flow in the dishwasher. 

And if there are issues with it, the water flow may be too slow, as a result of which your dishwasher will not fill with water. There may be clog in the water inlet valve. In addition, the valve may be too old, and cracked in some places. 

Solution:

Check the water inlet valve. And if you notice that there are cracks or damage on the surface of the valve that can be fixed with a tape, then you may opt to fix it yourself. Otherwise, you should call a professional to help you out. 

Float switch malfunction: 

Another reason that might cause issues that results in the dishwasher not filling with water is malfunctioning of the float switch. The float switch is responsible for turning on and off the water supply to the dishwasher. 

That is to say, the float switch will help you control the water flow. 

However, in case of a faulty switch, the water supply may stay off even when you mean to keep it on. This may cause the water supply to stop and not fill the dishwasher with water when you need it to. 

Solution: Get the float switch checked by a professional. It would be ideal to fix the float switch with a professional who has prior experience as there are a lot of delicate parts associated with it.

How do I check my whirlpool dishwasher water supply?

You should check the dishwasher water supply on a regular basis. It is very important to keep a check on the water supply of the dishwasher. Otherwise, it will be difficult to just identify that there are issues with the product in the first place.  

The first step in solving the water supply issue is to identify the problem. In order to do that, you will need to check your whirlpool dishwasher water supply on a regular basis in order to make sure that everything is alright. 

Firstly, you should have a look at the inlet valve for water. This valve will help you control the water pressure that is being allowed to the machine. If you are not careful, the valve will allow very slow flow of water, which will fail to fill the dishwasher with water. 

Make sure that the valve inlet is connected to the unit properly. 

In addition, you should make sure that the water supply to the dishwasher is alright. A lot of the time, the water supply hose may act up and the dishwasher may not receive the right amount of water supply that it would need to operate. 

So when you are checking the water supply, make sure that the hose is alright. 

How do you clean the inlet valve on a Whirlpool dishwasher? 

Read below to learn about the steps that you should follow in order to clean the inlet valve on Whirlpool dishwasher. 

Turn off water supply: 

The inlet valve is responsible for controlling the water pressure that is entering the dishwasher. In order to clean it, you will first need to clean the valve. After that, you can proceed to cleaning it. 

Disconnect the valve: 

In order to clean the inlet valve, you will firstly need to shut off the water supply. Make sure that the hose is also disconnected. Now you will need to disconnect the inlet hose as well. 

When you loosen the hose, make sure that you also pull it away from the inlet valve. After that, you should proceed to unscrew the fitting of the brass angle. You can use a screwdriver in order to ensure a smooth disconnection. 

Clean the inlet valve: 

Now that you have separated the inlet valve, it is time to clean the part. Note that this is one of the most delicate parts of the machine, so you should be careful with it. 

In order to ensure that the valve is getting cleaned smoothly, you may use a soft brush and some detergent or vinegar. 

Mix equal parts water and vinegar in order to produce a cleaning solution for the valve. Once you have it ready, soak a soft brush or a sponge into the solution. Then clean the part thoroughly. 

How do you fill a whirlpool dishwasher with water? 

Read ahead to learn how you can fill a whirlpool dishwasher with water. 

Clean the inlet: 

The inlet valve is mainly responsible for allowing water inside the dishwasher. If you want the dishwasher to operate properly, make sure that the dishwasher is clean. All parts, especially the water inlet valve should be cleaned thoroughly. 

Pour water into the dishwasher manually: 

If your dishwasher is acting up and you want to test the rest of its operation, then you can pour water into the unit manually. In this case, you should use about one and a half gallon of water. This is the general measurement of water that is required for each fill. 

You should pour this water into the water chamber of the dishwasher. But only do this if you are planning to check the machine. 

Run a wash cycle: 

Once you have filled your whirlpool dishwasher with water, you should run a cleaning cycle. This will help you check how the dishwasher is doing. 

In order to make sure that the rest of the dishwasher is alright, you should pay close attention to whether the dishwasher is making any noise while running a cleaning cycle. 

Final Thoughts 

If your whirlpool dishwasher is not filling with water, check some of the most crucial parts of the unit. It is likely that the water hose is acting up, or that there is something wrong with the water inlet valve. Stop the water supply to the machine and see if there are damages to these parts.