Dishwashers do a lot more than just wash your dishes. If you are using a dishwasher, you can save time, money, and as well as energy.
Although there are lots of manufacturers of dishwashers, Whirlpool is making the most popular and reliable dishwashers. However, if the buttons of your whirlpool dishwasher malfunction, your life can get miserable.
Follow our guidelines to get a better understanding of the button problems your Whirlpool dishwasher can get and how to address them right away.
Whirlpool dishwasher buttons not working
The buttons of the Whirlpool dishwasher are not working could be due to several reasons such as dirt build-up inside the washer, an electrical problem, issues with the touchpad and control panel board of the dishwasher, or problems with the trap and filter of the dishwasher.
Bear with us and find out the problems that might occur in different buttons of your whirlpool dishwasher along with their solutions –
Start button
The door is not properly closed:
For proper functioning of the start button of your Whirlpool dishwasher, the door of the dishwasher must be closed properly.
Solution:
Always double-check before pressing the start button to make sure the door of your dishwasher is properly closed.
Water supply issue:
Typically, the start button of your whirlpool dishwasher will not work if the water supply to the dishwasher is turned off.
Solution:
Always verify your dishwasher is getting water supply properly before pressing the start button.
Defective control panel:
If there are any issues with the control panel board with the Whirlpool dishwasher, the start button may not work.
Solution:
Try to reset the control panel board of your Whirlpool dishwasher. After this, if your start button is still not working, you may need to call a professional or replace the control panel of your dishwasher.
Cancel button
Cancel button stuck:
The cancel button can be stuck due to the accumulation of dirt and not work properly.
Solution:
Try to clean the button properly and reset it properly. If still, the button is not working, there may be problems with the touchpad or the control panel board.
Defective control panel:
If there are issues with the control panel of your Whirlpool dishwasher, the buttons may become not responsive.
Solution:
Try to reset the control panel board of your dishwasher. If still there are problems you may need to check the touchpad.
On-off button
Defective touchpad:
If the touchpad of your Whirlpool dishwasher becomes faulty, the button may become unresponsive.
Solution:
Try to check the touchpad to find out whether it is working properly or not. If the touchpad is not working properly, you may need to replace the touchpad.
Defective control panel:
Defective control panel can make the buttons of your dishwasher not work properly.
Solution:
Try to reset the control panel. If still the buttons are not working replace the control panel.
Reset button
Reset button stuck:
The reset button can be stuck due to the accumulation of dirt and not working properly.
Solution:
Try to clean the button properly and reset it properly. If still, the button is not working, there may be problems with the touchpad or the control panel board.
Defective touchpad:
If the touchpad of your Whirlpool dishwasher becomes faulty, the reset button may not work properly.
Solution:
Try to check the touchpad to find out whether it is working properly or not. If the touchpad is not working properly, you may need to replace the touchpad.
Defective control panel:
Defective control panel can make the buttons of your dishwasher not work properly.
Solution:
Try to reset the control panel. If still the buttons are not working replace the control panel.
Cycle button
Filled trap and filter:
If the trap and filter of your dishwasher are filled with dirt, the cycle button will not respond properly.
Solution:
Try to clean the trap and the filter and check again.
Water supply issue:
Typically, the cycle button of your whirlpool dishwasher will also not work if the water supply to the dishwasher is turned off.
Solution:
Always verify your dishwasher is getting water supply properly before pressing the start button.
Defective touchpad and control Panel:
If the display of the dishwasher is working but some buttons are not responding, there may be problems with the touchpad and control panel.
Solution:
Replace the touchpad and control panel.
Delay start button
The door is not properly closed:
For proper functioning of the delay start button of your Whirlpool dishwasher, the door of the dishwasher must be closed properly.
Solution:
Always double-check before pressing the delay start button to make sure the door of your dishwasher is properly closed.
Water supply issue:
Typically, the delay start button of your whirlpool dishwasher will not work if the water supply to the dishwasher is turned off.
Solution:
Always verify your dishwasher is getting water supply properly before pressing the delay start button.
Defective touchpad and control Panel:
If the display of the dishwasher is working but some buttons are not responding, there may be problems with the touchpad and control panel.
Solution:
Replace the touchpad and control panel.
How much does it cost to replace a whirlpool dishwasher control panel?
The replacement cost of the control panel of your Whirlpool will depend on the model of the dishwasher. Depending on the model of your Whirlpool dishwasher, replacing a dishwasher control panel can cost anywhere between 200 USD and 500 USD in the US.
For instance, the control panel for the WP10481125 model of Whirlpool dishwasher will cost around 230 USD, whereas the control panel for WP8530929 and WP8531292 model of Whirlpool dishwasher will cost around 270 USD to 280 USD.
To replace the control panel of your whirlpool dishwasher, you need to unscrew, disconnect the old control panel, and screw and connect the new one.
If you do not understand how to replace the control panel, you may need to call a professional to replace and connect the new control panel for you. If you are calling a professional you will require to spend some more money for the service.
How do I test my whirlpool dishwasher touchpad?
In order to test your whirlpool dishwasher touchpad, you need to go through the following steps.
Turn off the power and unlock the door:
In the first step, turn off the electric supply to the dishwasher and unlock the door.
Open the console and cut the ribbon connection:
After unlocking the door of the dishwasher, open the console and disconnect the ribbon connection and again connect all the ribbon connections with the touchpad properly.
Reassemble the console:
In the next step, reassemble the console after making sure that all the connections are properly established. In this step, do not close the door of the dishwasher.
Plug in the dishwasher:
Next, plug in the dishwasher with the power supply and make sure the dishwasher is getting electricity.
Close the dishwasher door:
After plugging in the dishwasher, wait five seconds and shut the door of the dishwasher.
Monitor the Control’s response:
In the next step, monitor the control’s r to find out whether the touchpad is okay or not. If the control board is all right, the dishwasher will respond by turning on a Drain Motor for around two minutes.
If the control is not okay, perhaps there are no issues with the touchpad.
If the control board is okay, it is clear that there is a problem with the touchpad.
How do I reset the control panel on my Whirlpool dishwasher?
To reset the control panel of your whirlpool dishwasher you need to follow five steps which are given below,
Turn off the Whirlpool dishwasher:
In the first step, you need to turn off the dishwasher by simply pressing the “Off” button.
Unplug the power cord:
In order to make sure, there is no power supply in your dishwasher, unplug the power cable from the AC outlet.
Wait for a few minutes and turn on the dishwasher:
In step 3, wait for 5 to 15 minutes and again reconnect the power cable of the dishwasher to the AC outlet. After plugging the power cord, turn on the dishwasher by simply pressing the “On” button.
Select the “High” setting:
After turning on your dishwasher, select either the “High” option or “Pots & Pans” option from the control panel of your Whirlpool dishwasher.
The “High” setting you can select for the washing cycle will vary based on the model of the Whirlpool dishwasher. In order to dry the dishwasher’s material, choose one of the “Heat” cycles.
Repeat the cycle:
Wait a few minutes and repeat the cycle once again to see whether the dishwasher is working properly or not.
These steps will reset the control panel of your Whirlpool dishwasher, you can use the dishwasher again like before. If these steps do not reset your dishwasher you may need to consult with a professional.
Final thought:
There could be a number of reasons why the buttons on the Whirlpool dishwasher aren’t working, including a buildup of dirt inside the washer, an electrical issue, problems with the touchpad and control panel board, or issues with the dishwasher’s trap and filter.