Skip to Content

Kenmore Washer Not Draining or Spinning? (Explained)

Kenmore Washer is considered a high-quality washing machine that is commonly popular for its longevity.

Generally, Kenmore makes front load top load and twin load washers. In today’s article, we will discuss the draining and spinning issue of the Kenmore washer. 

Kenmore washer not draining or spinning 

Generally, Kenmore is considered a popular appliance brand that manufactures front load, top load, and twin load washers. Usually, if the Kenmore washer won’t spin or drain, it could be because the pump is damaged or something is stuck in the washing machine drain hose or pump.

In some cases, you may notice that the Kenmore washer is not spinning or draining properly.

If the Kenmore washer does not drain or spin, you need to check the washing machine, drain hose, or pump because something might be stuck in there or this pump might be broken.

So, there could be some other reasons behind the Kenmore washing machine not raining or spinning. Below is a brief discussion on a few reasons why different types of Kenmore washer does not spin or drain: 

Not draining

Front load

Drain pump issue: 

It may be normal for the Kenmore washer to have a drain pump issue. Sometimes small objects can get stuck in the drain pump and that can prevent the Kenmore washer to drain water. 

Check the drain pump:

You need to check the drain pump to make sure that there is nothing stuck in the washer check the drain pump. Hopefully, this will help you to solve the problem and drain the water from the washer easily.

Clogged drain pump:

Kenmore washer consists of a drain pump that helps to push water from the washer. So, there is a chance that something might have stuck inside the drain pump and clogged it.

Clean drain pump:

The general rule for getting rid of the clogged water drain pump is to clean it after a certain time. This will eventually solve the issue easily.

Door lock issue:

Generally, the door lock of the washer ensures the security of the materials inside during operation. If the door lock is not shut properly, the washer may not drain.

Replace or repair the door lock:

The best way to fix the issue is to replace the door or repair it so that the washer door can close properly to make sure that the water can drain.

Top-load

The waste hose might be clogged:

If the Kenmore top load washer does not drain properly, the reason could be because of the clogged waste hose that pushes the wastes out of the washer.

Clean the waste hose:

The best way to solve the issue is to clean the waste hose and take out anything that has clogged the waste hose to fix the issue easily. This will be efficient and convenient.

Faulty pump motor:

Sometimes a faulty pump motor can prevent the Kenmore top load washer to function properly and drain water from it. As a result, it may cause difficulties for the washer to operate.

Change or replace the pump:  

The best way to solve the issue is to change or replace the pump if needed. In addition to that, you can also repair it if possible. This will save money and effort.

Twisted hose:

Generally, the hose pipe connected to the Kenmore washer may have been twisted in a way that is preventing the washer from draining the water.

Re-adjust the hose:

In such a case, you can try adjusting the hose pipe in a straight direction so that the pump can easily drain the water from the washer.

Not spinning

Front-load

Worn-out clutch:

Generally, the Kenmore front load washer consists of a clutch that enables the materials inside the washer to spin in a certain direction. There is a chance that the clutch is worn out.

Repair or replace the clutch:

The best way to fix the worn-out clutch is to repair it or replace it with a newer one to bring back better efficiency and convenience.

Worn-out drive pulley:

Generally, the drive pulley connects the washer drum and works with the drive belt. As a result, it helps the motor to rotate the drum. If the drive pulley is worn out, it will cause the drive belt to slip off and the washer will not spin.

Repair the drive pulley:

You can repair the drive pulley under the supervision of an expert mechanic to fix the issue and run the washer again.

Loose frayed or torn belt 

Generally, there is a belt that enables the drum inside the front load Kenmore washer to spin. If the belt is torn, it may prevent the washer from spinning.

Replace the belt:

The best way to fix the issue is to repair or replace the belt as soon as possible. Replacing the belt is much more recommended than repairing it.

Top-load

Faulty lid switch:

The lid switch of your Kenmore washer might be faulty and not closing the lid properly. Which is preventing the washer from spinning.

Repair the lid switch:

The lid switch is easily repairable and you can run the washer again once you fix the lid switch.

Damaged tub motor

Due to prolonged use, the tub motor may become damaged and prevent the washer from spinning.

Repair the motor:

You can easily repair or replace the motor with a newer one. It is very easy and simple to replace a tub motor if you are ready to put enough effort.

Damaged motor control board:

Generally, the motor control board of your Kenmore washer might be damaged. As a result, the washer is not spinning. 

Repair the motor:

Repairing the motor will bring back the efficiency again.

Is Kenmore washer not draining a common issue? 

Kenmore is considered a commonly popular type of appliance brand that makes a different type of washers for household work. Generally, the Kenmore makes front load top load, and twin load washers.

These washers are highly efficient and convenient to clean the stain and dirt from the clothes.

It is very normal for the Kenmore washer to have draining issues. Generally, due to prolonged use, the Kenmore washers may not drain water properly.

Below is a brief discussion on whether it is normal for the Kenmore washers to have a drain issue or not.

Kenmore Elite series:  

Generally, it is not normal for the Kenmore elite series to have a draining issue. In most cases, it happens due to prolonged use.

Kenmore 70 series: 

The draining issue may happen in the Kenmore 70 series. If there is something clogged in the drain hose pipe of the washer.

Kenmore 80 series: 

It will only face draining issues in the Kenmore 80 series washing machine if only any of the components of the washing machine are not working properly. Usually, it happens due to prolonged years.

Kenmore 90 series: 

It is not normal for the Kenmore 90 series washing machine to have a drainage issue. However, you need to take care of the washer to prevent the problems. 

Kenmore 600 series: 

The draining issue in the Kenmore 600 series washer is very normal and you do not need to worry about that because it is repairable.

How do you force a Kenmore washer to drain and spin? 

Kenmore is considered a commonly popular type of appliance brand that is known for its longevity of the product.

Generally, Kenmore makes different types of washing machine that includes top load, front load, and twin load. But sometimes, due to prolonged use of Kenmore, washing machines can have draining and spinning issues.

You need to be very careful and observed the problem to figure out what is causing the problem.

You can try forcing the Kenmore washer to drain and spin. It will easily fix the issue. You can simply follow the steps below to fix the Kenmore washer by forcing it to drain and spin: 

Place a bucket: 

The first thing you need to do to force a Kenmore washer to drain and spin a bucket behind the washer. 

Unhook the horse to drain water: 

After placing the bucket, you need to unhook the hose drained from the drain pipe. Now lower the end of the drain hose to the bottom of the bucket. 

Tilt the bucket: 

You may need to tilt the bucket slightly lower down to level with the hose pipe to get the drained water properly. 

Final thoughts

Kenmore is considered a commonly popular type of brand that makes different types of washing machines. Due to prolonged use, the washing machine may have issues with draining and spinning. In most cases, the issues are caused by a clogged drain pump, waste hose, and faulty pump motor.