GE microwaves are friends of every time. But, how well do you know your microwave? Ever wonder how many watts it uses? Well, knowing this not only give the users a sneak peek of them but can also help to save some bucks.
Watts usage for a GE microwave
Though the watt usage hugely depends on several affecting factors, experts jot down the value for the average consumer. According to the data, it is found, that on average, a GE microwave needs 23.4 watts per minute. That means with a startup power of 2700 watts, it can go as high as 1kWh per hour.
However, this is only a rough idea. A detailed outline about it would surely help the homeowners to keep a tight budget.
Per minute:
To run effectively, a GE microwave can use an average of 23.4 watts per minute. But, the real value can fall to the range of 16. 45 to 49.1 watts.
As nothing is fully efficient in the world, GE microwave is neither. They often tend to have higher input power for this reason. Thus, you should expect them to be as efficient as 71%.
But, this is not the same for every microwave. Some microwaves tend to be more efficient and powerful. They are highly appealing as they cut down the bills.
Per hour:
Alternatively, the calculation for per-minute usage is not sufficient. Rather, it only gives vague data to the consumers. The safest thing is to find that out for 1 hour.
Most often the value ranges from 1400 watts to 1600 watts, which is no less than 1 kWh. Despite it can also touch the peak of 3 kWh.
Don’t panic. Usually, the retailers stock GE microwaves with a 1 kWh value. The devices with enhanced power can demand more watts accordingly to your needs.
Per day:
No one uses microwaves for the whole day continuously. But, keeping the record for these values helps in the long run.
Almost every time, for 24 hours, a GE microwave uses up to 24 to 72 kWh. As a result, this might cost as high as 7.2 Us dollars per day, if you choose to.
As this data is backed up by the research of the 200+ products, the result is of course reliable and credible. So, in case, users are looking forward to using it for a straight one day, this is the maximum power it can need.
Per month:
Now, as all the values and data are in hand, it’s quite easy to find out the power consumption per month. Note that, this is the standard value that is being calculated everywhere.
Usually, they needed approximately 10,000 watts per month. This value is nearly 15kWh per month. Nonetheless, this value can drastically vary from brand to brand.
Assuming the microwave is being used up for only 15 to 30 minutes per day, this calculation is made. And, as far as, this is the most logical one.
Startup:
One of the crucial concerns of the users is the startup power of the GE microwave. Well, that’s not a worrying one. The power is within the range of 2500to 2700 watts for most of the brands.
But, some factors, like brand, usage, and amount of item heated, can hugely vary this power. For this, it is suggested to check the value before deciding to buy anything.
How much does it cost to run a GE microwave?
GE microwaves do cost you tons of money. And if you prefer to use them only when necessary, you will be amazed to see how much can you cut down their costs.
The regular value of the power consumed is not so high. Plus, the cost per kWh is relatively affordable for most families. Thus, it does not look like a hefty deal.
Only 44 cents is used per hour of usage. Often, we used to finish our work within the timespan of 15 to 30 minutes. Consequently, the cost can be as low as 11 to 22 cents every time you use it.
The good thing is this means annually users will not end up with bills piling up on their budget sheets. Instead, they will need to bear only 10 US dollars for the GE microwave. In the crowd of stress, this is a real relief to the expenses.
What factors determine GE microwave watt usage?
Though people like to draw conclusions about the power consumed by the GE microwave, nothing of them is certain. It’s more uncertain than counting stars in the sky!
Why? Because the value tends to vary a lot depending on a handful of factors. If you don’t have a clear understanding of them, often you would fall into a sea of trouble.
Usage of Microwave:
This is one of the most common determining factors for the power demand of your GE microwave. Monitoring this would answer all the doubts and confusions in a go.
How many times we use a microwave daily sets the benchmark of the energy it needs. For instance, a family who uses 30 minutes daily would have significantly lower electricity bills than a family who uses a microwave for 75 minutes daily.
This shows how much a value of power can be altered by increasing or decreasing the frequency you use the machine.
Number of People:
A family with a large number of people, inevitably, will need more microwaved foods in their daily needs. This can be the cause of the changed power consumption for some families.
Again, occasions can be exceptions. As microwaves are used more often at that time, the bills would not stop skyrocketing.
Brand and Model:
Some brands have the characteristic to use more power than others. Although they used that for some special services, it can be stressful for the users sometimes.
Such as some GE microwaves have the superpower to make the food smoother, softer, and more delicious. They do this by consuming the super power from your electricity providers.
As a result, a high value of power consumption is definitely apparent.
How do I check the power consumption of my GE microwave?
Even after so much confusion and dilemma, experts can not agree on a single value that is standard for all GE microwaves. Therefore, checking the power consumption on your own seems the most reliable option.
To find that you don’t need to complete hard math like calculus. Instead, with some general knowledge and guideline, it can be found out with ease.
Check the current and the voltage:
It is one of the simplest tasks ever. Look around your GE microwave and you’ll, most probably, end up finding it.
If failed there are user manuals to guide you.
Find the power:
A secret tip would help out the users. Just multiply the current with the voltage you obtained from the device.
Bingo! You have the power of the microwave.
Find the energy consumed:
The only power is not a reliable unit. It is often recommended to find out the energy consumed in one hour.
At first, divide the value of the power obtained by 1000. This will give the kW unit. Now, measure the power of the microwave in one hour.
Multiply both of them. What you got is the energy consumed per hour.
Monthly energy consumed:
To make this calculation helpful for you, you can find out the total consumption monthly. This would help to include the monthly bills and get a more realistic assumption.
Firstly, determine how many minutes you use the microwave. Then convert the minute to an hour to multiply it with the power. Lastly, multiply it by 30 to get the desired value.
How can I find out the wattage of my GE microwave?
The best part is the users do not have to go through these long calculations. The manufacturer’s note on the device, website, or manual can clear the wattage usage for them. Just one needs the right way to know this.
Start your searching expedition from the manuals. Most of the time, you will get the answer in the corner of any page of the instructions. However, if you failed don’t hesitate to look through the website.
If you failed in both cases, the ultimate savior is the serial plate of the microwave. You can find it on a sticker on your device. Along with the safety warning, you can find it there. Normally, this sticker is found inside or on the side of the microwave.
Final thoughts
In total, the watts a GE microwave uses vary greatly from family to family. Depending on myriads of external aspects, the average consumption per minute can be 23.4 watts. Though most of them have a startup power of 2700 watts, the value will show variance in some brands.