Food has been kept in storage for a very long time using a variety of antiquated, ineffective methods that may have worked temporarily but weren’t sustainable. This is why the refrigerator was one of the most important inventions till date and was widely hailed when it was created.
A distinctive refrigerator that is rapidly garnering enormous market traction worldwide is the GE profile series of refrigerators. However, GE Profile refrigerators might develop problems for several reasons.
So, let’s investigate the cause of GE profile refrigerators not cooling or working properly and learn more details about it.
Why is your GE profile refrigerator not cooling or working?
Faulty compressors, dirty condenser coil, damaged condenser fan, wrong temperature control settings, loose door gasket seal, flawed defrost timer, and thermistor sensor malfunctioning cause a GE profile refrigerator to not work properly. Multiple of the mentioned reasons may occur at the same time.
There are a variety of reasons that may cause your GE profile refrigerator to not cool or work properly. Thus, sometimes it is tricky to identify the exact reasons why a GE profile refrigerator is not working properly.
Now, let us discuss and identify the reasons about what may have caused your GE profile refrigerator to malfunction. Also, pinpoint a few of the exact reasons that may have gone wrong in your refrigerator.
Faulty compressor:
If your GE profile refrigerator compressor is not working, in that case, your fridge compartment may work fine, but the freezer compartment may not work properly or not work at all.
Dirty condenser coil:
It is a common occurrence and causes the GE profile refrigerator to cool inefficiently. It is easy to identify. If you keep the condenser coil clean, it will save you from unwanted problems.
Damaged condenser fan:
The condenser fan may run slowly or even stop running if the condenser fan gets damaged. If this happens, the GE profile refrigerator may cool intermittently or the cooling process may stop working.
Wrong temperature control settings:
The GE profile refrigerator comes with a built-in temperature controller so that the user can control the coolness of the refrigerator freely. If you set the temperature control incorrectly, it will result in undesirable cooling.
Loose door gasket seal:
It is another common problem that is widely seen relating to inefficient cooling. The rubber material that runs along the edge of the refrigerator door inside is the gasket seal.
It is responsible for keeping the cool air inside and the warm air outside. If the gasket seal is not tight enough and not in good shape, it will cause the cold air to flow out of the refrigerator.
Flawed defrost timer:
One of the most common causes of a GE refrigerator not cooling is having a flawed defrost timer or not setting the defrost timer properly. The defrost timer has only two options, it can either be set on or off.
Having a flawed or improperly set defrost timer may turn off your GE profile refrigerator.
Thermistor sensor failure:
The temperature sensor, also known as a thermistor, is responsible for detecting temperature and transferring the information to the electronic control board. Having a faulty temperature sensor will cause the electronic board to receive incorrect data.
As a thermistor often does not completely fail, it will send inaccurate data to the electronic control board. If this happens, your GE profile refrigerator will not cool properly as a result.
How do you know if your GE profile refrigerator compressor is bad?
One of the biggest giveaways of your compressor going bad is the noise it makes. A mint condition compressor makes a mild humming noise. But if your compressor makes a loud humming or buzzing sound, it usually means your compressor is going bad.
If your compressor struggles to work properly or turns off randomly, it is also a sign of a bad compressor. It happens when the compressor’s start relay is defective, so it does not work properly.
If your GE profile refrigerator is not cooling very well and the compressor seems to work sometimes but not throughout the day, this may be the reason.
Another giveaway of a bad compressor is that it is unusually hot. That means the compressor is overheating. If your electricity bill is higher than normal and any other symptom we discussed here is also present, it is likely your compressor is bad.
How much does it cost to replace a GE profile refrigerator compressor?
The prices of a new compressor for a GE profile refrigerator range from $100 to $650. However, there is the labor cost to consider as well.
The cost of replacing a GE profile refrigerator compressor depends on the model you own. Depending on the model you have, you may have to pay a hefty amount to replace your GE profile refrigerator compressor.
Some professional technicians may charge you an hourly rate of $50-$120 and some may charge a flat rate. There is also the service fee to consider. Including labor costs, you may expect to pay up to $1000.
Normally, compressors stay in good shape for a long time. If you have used your current GE profile refrigerator for 10-15 years, it is not worth it to replace your compressor. Rather, you should go for a new refrigerator at this point. Otherwise, you should go for the replacement.
How do I fix my GE profile refrigerator that is not cooling?
The following tips will help you to fix your GE profile refrigerator that is not cooling –
Cleaning the condenser coils:
Cleaning the condenser coils is too important for GE refrigerators. Dirty condenser coils cannot release heat produced by the refrigerator properly, resulting in inefficient cooling. Use a brush or a handheld vacuum cleaner to clean the condenser coils.
Repair or change the compressor:
If your compressor has gone bad, you will need to repair it or replace it depending on its condition. Hiring a professional is recommended for this.
Adjust the temperature control settings:
If your GE profile refrigerator is not cooling enough, you adjust the temperature settings according to your needs. You can reduce your refrigerator’s temperature by a few degrees and wait for a whole day.
If the refrigerator is still not cool enough, follow the previous step again. Your refrigerator’s owner’s handbook will come in handy for this task.
Replace the damaged condenser fan:
If your condenser fan is running slowly or not running at all, you need to replace the condenser fan. We recommend you hire a professional for this.
Reset your GE profile refrigerator:
Resetting your GE profile refrigerator will solve problems regarding incorrectly programmed defrost timers, faulty temperature control settings, etc.
How do you reset a GE Profile refrigerator?
You can reset your GE profile refrigerator yourself and save money by not hiring a professional technician. Here are some simple steps for you to follow to reset your GE profile refrigerator:
Adjust the refrigerator’s position:
To start the fixing process, move your refrigerator from the wall as far as you can. This will allow you to have complete access to the refrigerator. So, you can also clean the space behind your refrigerator unit and keep your refrigerator in a clean environment.
Disconnect the plug from the AC outlet:
As you have moved your refrigerator from the wall, it should be obvious where the power cord of your refrigerator connects to the ac outlet on the wall. Unplug the refrigerator from the power outlet and keep it like this for a minute.
Reconnect the plug:
Plug your refrigerator back into the ac power outlet after a short time has passed. Wait until the refrigerator starts up. You will hear a sound when it happens.
Switch off the main switch:
The shutoff switch is a small device that can be found inside the freezer. Open the freezer cabinet and find the shutoff switch. Turn it off and wait for approximately 30 seconds and then turn it back on.
Reset the refrigerator:
The shutoff switch can usually be found at the top of the ice maker. To complete the resetting process, push up and down the switch three times.
Final Thoughts
There are many reasons that may cause your GE profile refrigerator to not cool properly including a faulty compressor, dirty condenser coil, etc. However, troubleshooting your GE profile refrigerator and taking the right steps to fix it will make it as good as new and resolve the issues.