The dishwasher is considered one of the most common essential household appliances. Generally, it is used to clean dishes in the kitchen. In today’s article, we will discuss the issues that can cause Frigidaire dishwasher buttons not to work.
Frigidaire dishwasher buttons not working
Several reasons can cause the dishwasher buttons not to work. The first thing that can cause the dishwasher buttons not to work is a damaged touchpad. If there is a blown thermal fuse or damaged touchpad ribbon cable, the dishwasher buttons will not work or respond to the commands.
The general purpose of having a dishwasher in your house is to clean the dishes. Below is a brief discussion on the reasons for having issues with different buttons of your dishwasher and solutions to them:
Start button
Corroded touchpad:
One of the most common issues that can cause the dishwasher to malfunction in its start button is a corroded touchpad.
Fix the touchpad:
If the touchpad is corroded, you need to fix it immediately by replacing it with another one or fixing the corrosion issue in the touchpad.
Touchpad control panel synchronization:
Sometimes if you notice that the touchpad is not working, this can be the reason for the touchpad control panel’s failure to synchronize with each other.
Reprogram the component:
In that case, immediately need to fix the touchpad and control panel to make sure they synchronized with each other properly.
Control panel error:
The dishwasher buttons may remain fine, but the control panel may have some serious error issues.
Reprogram control panel:
The best way to get rid of this issue is to reprogram the control panel with a professional mechanic or technician so that it can work again.
Cancel button
Bad power connection:
One of the most common issues that can cause the dishwasher cancel button to fail to operate is a bad power connection.
Check the power connection:
It is an ideal solution to check the power connection and make sure that the dishwasher is plugged in properly.
Junction box error:
Having an error in the junction box that is currently operating with the dishwasher can also be one of the reasons that can cause an error in the button.
Check the junction box:
You need to check the junction box to make sure that it is working properly with the dishwasher.
Blown fuse:
A blown fuse can be another reason that can cause the dishwasher failure to operate.
Replace the fuse:
You simply need to replace the blown thermal fuse with the newer one.
On-off button
Corroded ribbon cable:
Sometimes your dishwasher may have a crowded ribbon cable that can cause the on-off button not to work.
Remove corrosion:
You simply need to remove the corrosion from the ribbon cable to fix the issue.
Program error:
Sometimes the program in your dishwasher may not be able to work properly.
Reset the dishwasher:
You need to reset the dishwasher to fix the issue.
Tripped breaker:
If the power buttons in your dishwasher are not working, you need to check the circuit breaker.
Readjust breaker switch:
You need to readjust the breaker switch to fix the issue.
Reset button
Faulty button:
The reset button in the dishwasher will not work, only if the button is faulty.
Fix the button:
You need to fix the reset button in the dishwasher or replace it with a new one.
Damaged control panel:
Damage to the control panel can also prevent the reset button from working in the dishwasher.
Fix the control panel:
You can simply fix the control panel or replace it with a newer one.
Technical error:
Due to prolonged use, the dishwasher may have some technical error and fail to operate the reset button.
Restart the washer:
You can try restarting the dishwasher to get rid of the reset error issue.
Cycle button
Faulty button:
It is very common for the dishwasher to have a faulty cycle button.
Replace the button:
If your dishwasher has a faulty cycle button, you can simply replace that.
Faulty Control Board:
Having a faulty Control Board can prevent the dishwasher from operating properly.
Check and fix the button:
check and fix the faulty Control Board immediately to get rid of this issue.
Loose button:
Due to prolonged use, the dishwasher buttons may become loose.
Press the button harder:
You need to push the button a little harder to operate.
Delay start button
Bad connection:
The Delay start button will only not work if it has a bad power connection.
Check the power connection:
You need to check the power connection and make sure the dishwasher is plugged in.
Wire damage:
Sometimes the wires connecting the dishwasher to all the control boards may get damaged.
Check wires:
You need to check all the wires and make sure they are adjusted properly.
Damaged ribbon cable:
The ribbon cable in your dishwasher can also cause it to perform poorly.
Check ribbon cable:
You need to fix the ribbon cable immediately and try using the delay start feature again.
How much does it cost to replace a Frigidaire dishwasher control panel?
The dishwasher not only reduces human effort in cleaning dishes but also saves a lot of time. It is a very essential part of your regularly used kitchen appliances. Due to prolonged use, the dishwashers may have some minor problems that can vent them from operating independently.
One of the common issues that can cause the dishwasher to stop programming properly is having issues with your buttons. Since the dishwasher is an electronic appliance, it is very normal for the dishwasher to have several types of button issues.
It is very easy and simple to replace a Frigidaire dishwasher control panel if you can do the job with the assistance of a professional mechanic or technician. Generally, the replacement cost of a control panel should range from $200.00 to $500.
However, depending on the make and model of your dishwasher, the replacement costs of the control panel board may vary. So, you should determine what type of control panel board you are going to replace for the dishwasher to know the optimum cost.
How do I test my Frigidaire dishwasher touchpad?
Having a dishwasher in your house will not only reduce the human effort to clean the dishes but will also save precious time. However, the dishwasher is an electronic appliance.
That is why it is normal for the dishwasher to have some minor issues. One of the common issues that most house owners face in their dishwashers is having trouble with the touchpad.
Sometimes the touchpad may not respond to the commands properly. That is why you need to check the touchpad of your Frigidaire dishwasher to make sure that it is working properly.
There are some common ways to check the touchpad and make sure they’re working properly. Below is a brief discussion on how to check your touchpad on the Frigidaire dishwasher:
Press down the buttons:
The easiest way to check the Frigidaire dishwasher touchpad is to simply press down the buttons.
Check the control panel:
You can also check the control panel to make sure they are not corroded, otherwise, the buttons will not work.
Check the ribbon cable:
If you cannot figure out any issue with the dishwasher buttons, you can check the ribbon cable instead.
How do I reset the control panel on my Frigidaire dishwasher?
Generally, the dishwasher is an electronic appliance that is used to reduce human effort and save time. However, due to prolonged use, the dishwasher may have some minor problems that can cause a malfunction in the dishwasher and prevent it from working properly.
However, most of the component issues of a dishwasher are associated with the control panel system.
That is why you can simply reset or fix the issues by resetting the control panel of your dishwasher. Once you reset the dishwasher, the problems may not come back again. To reset the control panel, you can simply follow the steps below:
Locate the cancel button:
To reset the dishwasher, the first thing you need to do is to locate the cancel button that is placed on the far right side of the control panel.
Press it down for three seconds:
After you locate the cancel button, you need to press it down for at least three seconds. Depending on the make and model of the dishwasher, you may need to press it down for more than three seconds.
Wait for the light display:
After pressing down the cancel button for a couple of seconds, you need to wait for the light display to appear or change.
Once the light appears on your dishwasher or changes, you can easily understand that the dishwasher has been reset to the defaults. Hopefully, this will reset the dishwasher.
Final Thoughts
If you are having trouble operating the dishwasher using its buttons, it may be caused due to an error in the control panel board or a blown thermal fuse. That is why you can fix the issue under the guidance of a professional mechanic or technician easily.