Skip to Content

Why Is My Shark Vacuum Making Weird Suction Noise?

The ideal role of technology is to make our lives fundamentally easier and not have to worry about the mundane. Unfortunately, however, it can also be the cause of your headache from time to time.

Cleaning is one of those tedious and routine tasks that we often rely on the help of technology for. And Shark vacuums are the go-to vacuum cleaners when it comes to getting the job done with maximum efficiency.

Nevertheless, Shark vacuums are no exceptions to having an issue or two every once in a while. If your Shark vacuum is making weird suction noises, then you’ve come to the right place.

Our troubleshooting guide here will help you identify the issue with your Shark vacuum as well as outline what you have to do to fix it.

Why is my Shark vacuum making weird suction noise?

The reason your Shark vacuum is making weird suction noises could be due to a variety of factors. The most common causes include blockages, dirty or damaged filters, or an air leak. It could also be a direct result of a broken fan or a damaged brush roll. Inspecting it closely is the first step.

Vacuum cleaners aren’t exactly silent when they are turned on. However, it’s possible for your vacuum to become obnoxiously loud if you don’t maintain it properly. This could be due to a number of reasons.

When it comes to Shark vacuums, the primary cause for them making unusual sounds is likely due to dirt or dust blocking the airflow. Let’s take a closer look at some of these reasons to give you a better idea of what to look for.

Dirty and Damaged Filters:

This is one of the most common issues to run into that can alter the sound of your Shark vacuum. Filters are bound to get dirty the more you use your vacuum, and they are prone to damage if you don’t clean them routinely.

Vacuum filters are responsible for filtering out the dust and dirt that gets sucked in through the hose. Shark vacuums usually have two of them. A primary one that filters a good portion of the dust, tiny debris, dirt, and hair which is then stored in the canister.

The secondary filter on the other hand filters the tiny particles that were able to pass through the primary one to purify the suctioned air further. Repeated use of the vacuum causes dirt and debris to accumulate on these filters over time and this affects the flow of air in your vacuum. The weird suction noises are a direct result of such.

Blockages:

If your Shark vacuum has no suction and making loud noise, it could be due to a blockage or a clogged-up hose. In household settings, it’s usually pieces of clothing or clumps of hair or paper that block the airflow and cause the suction to stop.

On the other hand, if your Shark vacuum is making weird noise from the side, check the canisters for any solid objects that might be stuck.

Air Leak:

Continued use of the vacuum can often lead to holes and tears in the hose and canister. If the noise coming from your Shark vacuum sounds like a high-pitched whistle, then you should check it for any leaks that might be compromising the suction.

Faulty or Broken Fan:

Most Shark vacuum cleaners have a fan that plays an essential role in preventing them from overheating. When the vacuum motor sucks in dust through the hose, it can lead to the fan being jammed.

If your shark vacuum is making loud noise and burnt smell, it’s because the fan isn’t working properly.

Dirty or Damaged Brush Roll:

Last but not least, a dirty brush roll is another reason that can cause your Shark vacuum to make weird noises.

If a piece of debris gets stuck in the brush, it can lead to the vacuum making loud noises. A damaged brush roll could also cause be a potential culprit.

What are the most probable reasons for these Shark vacuums making noises?

Shark manufactures a wide variety of vacuum cleaners for all your different needs. We’ve compiled this list of their best cleaners and the probable causes for why they could be making weird suction noises.

Shark Robot Vacuum:

Shark robot vacuums are the future of vacuum cleaners. It comes with a self-cleaning brush roll.

If your shark robot vacuum is making noises, then you should check the filter for any signs of damage. You should also check the fans to see if they are working properly.

Shark Cordless Vacuum:

The shark cordless vacuum comes with anti-hair wrap technology so you don’t have to worry about unwanted blockages.

If your cordless vacuum is making noises, you should check first to make sure if there is any damage to the filters. You should also check to see if the fan is working properly.

Shark Navigator Vacuum:

The most common cause for the Shark Navigator vacuum is a clogged filter. Check the passageways to make sure that there aren’t any blockages to eliminate the noise.

Shark Duo Clean Vacuum:

Shark duo clean cleaners come with their trademark DuoClean technology which allows two different brush rolls to deep clean surfaces that are difficult. Check to see if there’s any debris stuck in the brush rolls if your vacuum is making noises.

Shark Rotator Vacuum:

One of the most probable reasons for the Shark rotator vacuum to make noise is a jammed brush roll. You should inspect the filters and the dusting brush to see if there are any potential blockages.

Shark Rocket Vacuum:

If your Shark rocket vacuum is suddenly making noises, it’s likely due to a blockage or dirty filters. Examine the hose and brush rolls as well if it sounds louder than usual.

Shark Stick Vacuum:

The shark stick vacuums come with self-cleaning brush rolls. So, the most likely cause of them making noises is due to something blocking the airflow. Check to make sure that the filters are clean and that there isn’t anything stuck in the hose if it is.

Shark Ion Vacuum:

The shark ion vacuum is capable of cleaning both small and large debris across countless surfaces. If it’s making a weird noise, make sure that the dust cup isn’t full and the filters are unclogged.

Shark Pet Vacuum:

If your shark pet vacuum is making noise, you should check the filters and brush rolls for any damages. Moreover, you should also examine the passageway to make sure that there aren’t any blockages stopping the airflow.

How to fix loud suction noise in a Shark vacuum?

So, now that we’ve identified the probable causes behind the suction noise of your Shark vacuum, let’s talk about how you can fix them.

Fixing a clogged vacuum:

If your vacuum is making noises because of a blockage, you need to find and remove it to fix it.

  • Disconnect the wand, hose, and all other attachments.
  • Start by examining them with a flashlight.
  • Use a brush or stick to remove the blockage.
  • Put all the parts back together.
  • Test your vacuum to see if the noise is still there.

Fixing a dirty or damaged filter:

If your Shark vacuum is making noises due to a dirty or damaged filter, follow these steps below:

  • Start by checking the manual to see how many filters your vacuum has.
  • Take the filters off one by one.
  • Rinse the washable filters with warm water and let them air dry.
  • If your filters are worn out, replace them with new ones.
  • Some shark vacuums have HEPA filters that are not washable. Clean them with an air compressor instead.
  • Check if the vacuum still makes any noise.

Fixing a dirty or damaged brush roll:

Follow the steps below to fix a dirty or damaged brush roll:

  • Unplug the vacuum completely and lay it flat so that the brush rolls are facing upwards.
  • Remove the plate that is covering the brush roll.
  • Use a brush to clean the dirt and debris stuck in the brush roll.
  • Check to see the brush rolls spin effortlessly.
  • If the brush roll is too worn out, replace it with a new one.

Fixing an air leak:

If your vacuum is making a high-pitched whistling noise, then here’s what you have to do:

  • Check for any visible holes or tears in the hose, wand, and canister.
  • Seal the hole with duct tape if you want a temporary fix.
  • Replace the parts with new ones.

Final thoughts

To sum it up, the key reason behind your Shark vacuum making weird noises is due to compromised airflow. This can be caused by a number of things including clogged filters, blockages, damaged brush rolls, or some kind of leak. Finding the right cause requires the vacuum to be examined carefully.