Skip to Content

Why Is My Dryer Blowing Lint Outside? (Answered)

Lint production by dryers is a typical function of the equipment. Laundry lint is made up of loose threads and fibers. When washing your garments by hand, you might not even see them.

Lint, however, emerges as a residue from the dryer’s drum as it rotates. Hot air leaves the dryer and enters the machine bringing lint. If you do not routinely clean your dryer, it may eventually become blocked and discharge lint outside.

Dryer blowing lint outside

Lint flying outside from your dryer might indicate a clogged vent in the appliance. This does not imply that your machine has to be serviced. However, it must be cleaned. The cause of a clogged vent may be a defective dryer duct or a lack of a lint screen.

The dryer may blow lint outside for a variety of reasons. The causes could include,

Defected or Lack of Lint Screen:

Lint must be all over the place if your dryer does not have a lint screen. Lint is supposed to be captured by lint screens.

The screen has to be installed after the machine has been cleaned. The same thing might happen if your lint screen has a problem. You can keep working after installing the screen.

Loose Ring Bracket:

The dryer duct is connected to the machine by a ring bracket. Lint-carrying hot air travels through the duct.

Lint may flow outside if the ring bracket became loose, and it won’t be disposed of properly. Make sure the ring bracket is airtight and verify the connection from both sides.

Defected Dryer Duct:

It’s possible for a dryer duct to rupture or break. To completely remove lint, the dryer duct must be airtight. Lint will blow out of the dryer and into the surrounding environment if the dryer duct is broken.

You can’t just tape over the damaged section and continue. If this happens, you should replace the dryer duct and get a high-quality dryer duct.

How do I stop my dryer lint from blowing outside?

Lint will be blown outdoors by your dryer. The vent in your wall that the dryer duct is connected to allows hot air to enter and exit. Lint is carried by the hot air and is expelled outdoors. You can install vent traps or screens to prevent dryer lint from blowing outside.

Lint Screens for Inside:

The dryer’s lint screen resembles a set of mesh plates. They stop the majority of the lint from exiting the vent hose. The dryer’s lint screen needs to be cleaned after every load of wash. Otherwise, the hose can become clogged with lint.

Vent Traps for Outside:

Outside vent traps are mesh bowl-shaped structures. Vents come in two shapes: round and rectangle. To get the proper traps for your dryer, you must measure and examine the vent’s dimensions.

Most of the time, these vents are simple to install utilizing vent screws. If it does not come with such features use screws to attach the trap over your vent.

A vent trap may be useful if you wish to prevent animals from entering the vent or keep your yard tidy, but it also poses a fire risk. Lint will accumulate as you set a trap and gradually adopt the shape of a lint plug.

As hot air passes through the vent, the built-up lint can occupy space in the duct and adhere to it, eventually creating a fire.

How often should you have your dryer vents cleaned?

Depending on how often you use your dryer, you may need to clean it. Once a year is the typical cleaning frequency, and each load of laundry requires that the lint trap be cleaned.

However, if you have a big family, pets, and constantly buy new clothes, your dryer will need to be cleaned multiple times a year.

Additionally, the machine needs frequent cleaning if your laundry involves bulky items like blankets, towels, or quilts because they tend to produce more lint than any other washing item.

It’s best to inspect your dryer vent every 15 days to make sure it’s operating properly and isn’t clogged. In this manner, you may be certain that your dryer is secure and won’t catch fire.

It is preferable to keep the dryer vent and trap clean. When the dryer is clean, it uses less energy and operates more effectively while consuming less electricity. Your electric bill might be reduced by up to 30%. Additionally, it lessens the danger of a fire.

How to catch dryer lint outside?

You cannot allow lint to block up your dryer. Strongly flammable is lint. Every year in the USA, a fire threat caused by clogged dryer lint affects over 1500 homes.

Your dryer won’t operate effectively or be safe to use if you leave the vent in that condition and do not install a method to collect the lint. There are a few steps you need to take in order to collect lint outside. Such as,

Disconnect the Dryer:

The dryer must be unplugged from its power source as the initial action. Disconnect the dryer from the gas line if you have one.

Move the Dryer:

The dryer must now be moved slightly forward from its current position. You must look behind the machine because the dryer duct is attached to the wall. If you see any lint while working, use a vacuum to clear the space.

Detach the Dryer Duct:

A ring bracket connects the dryer duct. To make the dryer duct more flexible, you must remove the ring bracket. Place a container or sheet to catch any dirt or lint that may spill out before opening the dryer.

Use a Lint Brush:

You should now clean the vent’s interior with your lint brush. You can utilize a variety of lint brushes. Lint brushes with longer handles are useful for cleaning. Additionally, brushes that can spin might be helpful.

Check the Outside Vent:

Now make your way outside to the external vent. You may need to open the dryer vent depending on the model it is. While some machines need tools, others are simple to open. It is best to remove the vent cover while wearing gloves and to put it aside after removal.

Inspecting the Vent:

When checking the vent, start by visual inspection. Around the vent, wasp, ant, or bee nests occasionally appear. It is preferable to call an exterminator rather than manually clearing any blockages you may have seen there. If not, the next action can be taken.

Using Lubricant:

Check the vent now for corrosion or grease, add lubricant if necessary. After that, carefully inspect the vent to see if it has any fractures or missing pieces.

In this manner, you risk having a defective vent system that could let pests or rodents into the laundry room or dryer duct.

Remove Lint and Dirt:

Now clean the interior of the outside vent with a vacuum or a lint-removing brush. Vent cleaning is necessary frequently if you live in a humid area.

Lint was able to adhere to the vent surface due to the air’s moisture content. To properly clean the vent, you must move the brush or vacuum from side to side and all around.

Clean the Vent Cover:

Grab a washcloth and some warm water with dish soap or liquid soap. Completely wipe the vent cover after soaking the washcloth in the soapy water.

You can then remove any dirt or soil that has become stuck to the surface in this manner. After cleaning the cover with a damp cloth, rinse it with water and let it air dry.

Lint Trap or Screen:

Last but not least, check that your lint trap or lint screen is set up to capture the lint. Buy another one right away if the trap is damaged. It is best to clean the screen after every load of laundry is removed.

This will allow you to collect any lint that may have fallen outside and maintain a tidy, lint-free laundry room.

You may frequently hear that using a pantyhose to capture lint on an outdoor vent is a good idea, but by doing so, you run the risk of blocking the vent and setting it on fire.

Final Thoughts

Lint may be blown outside by a blocked dryer vent. You should routinely clean the dryer vent. Lint could potentially escape due to a broken lint screen or dryer duct. Although the dryer vent can be configured to collect lint outdoors, it still has to be examined and cleaned to prevent fire threats.