Skip to Content

Whirlpool Side by Side Refrigerator Not Cooling or Working?

Fridges are important appliances around the household. These machines are used regularly. So make sure you know how to fix the small malfunctions as they occur.

Whirlpool side by side refrigerator not cooling or working

Usually a dirty coil can lead your Whirlpool refrigerator to not start cooling. The coils are condenser coils that dissipate heat when the refrigerant passes inside the pipes. A dirty coil will not be able to dissipate the heat, which will lead to the refrigerator not starting to cool.

The sole purpose of a refrigerator is to keep the insides cool enough for the food and ingredients so they do not get rotten. It is a very convenient and useful appliance to have around the household. But sometimes it may not work that way. It is not very rare for the fridge to not work.

When this happens to your Whirlpool side by side refrigerator try to get to the reason behind it. Usually when you find the right cause behind the fridge not working, you can fix it quickly before it takes any serious defect or problem-

A dirty coil:

A dirty coil is usually the main cause behind the Whirlpool side by side refrigerator not cooling. And this leads to the fridge to not work in general.

A coil that has any debris or dirt in them will not work properly and with time will stop working in general. Which leads to the fridge not cooling.

Coils are there to dissipate the heat inside the fridge itself. So if there is any obstacle, be it small, the coils will not work the way it usually works. This can lead to the fridge not working, meaning the fridge will stop cooing.

Lack of ventilation:

The ventilation system matters a lot as well when it comes to the fridge cooling.

If the air vents of the fridge are somehow blocked then the cooling will not work. The cooling air will not be able to filter inside the fridge if the air vents are blocked.

Broken gasket:

Another important and technical issue that might be behind the not cooling of the fridge is the broken gasket seals.

The gasket seals do not necessarily need to be broken, they can be dirty for the fridge to not work properly. Even an old gasket could do the damage to the fridge as well.

Set proper temperature:

One thing that is a very common reason is the temperature controls.

When you set the temperature controls make sure it is between 32º F – 40º F. This is the ideal temperature for a refrigerator. I the temperature settings are done in a wrong setting then you will notice the fridge not cooling properly.

When it comes to a fridge make sure you check all the possible reasons. You should not keep a fridge not working or not cooling for too long. It will create a lot of inconvenience. Better to get it checked as soon as possible.

How do you know if your Whirlpool side by side refrigerator compressor is bad?

A very important piece in the any refrigerator is the compressors. And for a fridge like Whirlpool side by side it determines the overall condition of the fridge.

How much the cooling system of the fridge works depends on the condition and setting of the compressor. IF the compressor goes bad the fridge won’t work either.

There are a few ways to tell if the compressor has gone bad. You might start hearing unusual sounds from the compressor. The sounds maybe be loud when it is running. The frequency of turning on and off is too much than usual. And the compressor will begin to turn off abruptly.

If you notice anything out of the usual then you should check the compressor immediately. There might be an issue with the compressor. It is not uncommon and should be taken care of as soon as possible. Try to mend the issue quickly.

How much does it cost to replace a Whirlpool side by side refrigerator compressor?

Refrigerators are not appliances that break or get damaged very frequently. But if you find any damage or complications in the fridge you have you should get it checked and fixed immediately.

The fixing cost may seem like a bit too much compared to other appliances but it is best to get the fridge fixed soon.

Whirlpool side by side fridges need to be handled with more care than usual. The general rate to fix the fridge is usually between 500 dollars. This amount could go much higher, up to 1000 dollars depending on the type of fixing it needs.

The Whirlpool side by side refrigerator needs to be handled with special care. This is why the repair cost seems too much. But replacing the compressor of any fridge costs a lot. The cost is just a bit higher than average for the Whirlpool side by side refrigerator  as it is high end.

How do I fix my Whirlpool side by side refrigerator that is not cooling?

A broken appliance can be a huge headache. And a fridge that is not cooling or working properly is a big trouble for the entire house. If you see the refrigerator running warm then it is a clear sign that there is something wrong with the machine. You should check it immediately-

Clean coil:

If the fridge is not working because of a dirty coil, then it is only natural to clean the coil thoroughly. You can use a dryer brush to clean the coil. Or you can pull the fridge away from the wall and vacuum the coil directly to make the coil clean entirely.

Fix door seal:

If there are any gaps or damages in the door seal the fridge will not cool inside. The cool air will just leave the fridge.

So if you notice that just quickly fix the door seal. The door seal is not very costly either. It is best to change the entire seal if this problem occurs.

Proper power points:

Check for the power points. If there is a failure in the power points then the fridge will not work properly. Check the temperature setting as well while you are at it. The power points are crucial for the fridge to work properly.


If nothing else works on the exterior of the fridge, try to restart the refrigerator. This usually works and it solves any problem with the power point as well.

All the settings go to default and the fridge starts working properly. And if this doesn’t work, get it checked by a professional.

How do I reset my Whirlpool side by side refrigerator that is not cooling?

Refrigerators work almost all of the time. When an appliance is running for so long it is very common for it to need a reset every now and then. Whirlpool side by side fridges are no different from this condition. If there is some minor malfunction in the fridge make sure to try and reset the fridge-

  • You will need to unplug the machine first to cut off the power supply to the machine.
  • After unplugging wait 5 to 10 minutes to ensure that there is no power supply going in the fridge.
  • After 10 minutes you can re-plug the machine to switch it on. You can also press the “on” switch on the circuit board to start the fridge again.
  • Now that the fridge is running again, press the “lock” button and then the “filter” button. You will find the buttons on the control panel. It is best to press the buttons simultaneously. Keep the buttons pressed for about 3 seconds and then let go.
  • You have to look for the signs that the control panel is working fine. If there is lights flickering or unusual buzzing noises then the control panel is malfunctioning.
  • Press the door switch and adjust the temperature. The door switch might be hard to locate. It is usually on the side of the door and is white in color. And with that you will have reset your Whirlpool side by side fridge. 

Final thoughts

The Whirlpool side by side refrigerator can sometimes malfunction and stop cooling. It is usually because of a dirty coil. All you need to do is clean the coil from any debris or dirt. But if that does not work either you can always try to reset the fridge.