Washing machines have become a must-have item in our households. It has made washing clothes much simpler for us. With a Maytag centennial washer, you can wash clothes in a matter of minutes.
However, your Maytag centennial washer can stop spinning or draining. So, you might be wondering why the Maytag centennial washing machine does not drain or spin.
You might also want to know how you can get this washer to drain and spin properly.
Maytag centennial washer not draining or spinning
A Maytag centennial washing machine can stop spinning or draining for a couple of reasons. One of the most common reasons for this washer to stop draining or spinning is a faulty lid switch. This unit can also stop draining if the drain hose of the washer gets clogged or blocked.
The Maytag centennial washer will not stop spinning or draining without any issues. If there is some fault in the Maytag centennial washer, it will either stop draining or spinning.
However, if the lid switch of the unit isn’t closed properly or is defective, then the washer can stop both spinning and draining.
This washing machine manufactured by Maytag can stop draining for multiple reasons.
Among them, clogged drain hoses, clogged drain pumps, overloaded washer tubes, and defective lid switch assembly are some of the most common reasons.
The Maytag centennial washing machine usually stops spinning if the wash load is unbalanced and if the lid switch is faulty. However, it can also stop spinning if the drive belt of the unit is damaged.
Let’s take a look in detail at why your Maytag centennial washer is not spinning or draining.
Not draining
Defective lid switch:
There is a safety feature in the Maytag centennial washer is that the washer will not start if the lid switch is not closed properly.
This is done to prevent any accidents. If the washer doesn’t start, the used water will not be able to drain. So, a defective lid switch will stop the Maytag centennial washer from draining the water.
Repair the lid switch:
Before checking if the lid switch is defective or not, check if it is closed properly. You can press it with your fingers until you hear the click sound to check if it is closed.
If the lid switch can’t be closed, the best way to fix it is to replace the switch to make the washer start draining again.
Blocked drain pump and drain pump filter:
The drain pump of the Maytag centennial washer features a pump filter to prevent hair, lint, and other objects from blocking the drain pump itself.
If the drain pump filter is not cleaned regularly, it will get clogged, preventing water from draining through the drain pump.
Unclog the pump filter:
To drain the water properly through the drain pump, you should clean the drain pump filter. You can easily open the drain pump filter by twisting it and then clean it with running water.
You should also clean the drain pump while cleaning the pump filter to ensure proper drainage for a long period of time.
Kinked drain hose:
The water from the washing machine drum is drained through the drain hose. If the drain hose gets clogged, the Maytag centennial washing machine will stop draining.
The drain hose can get blocked by the lint of the clothes, hair, and other foreign objects.
Remove the drain hose blockage:
Clearing a clogged drain hose is quite simple and you can do it effortlessly in a short period of time. You should first remove the drain hose clamp and make it straight and pass running water to remove all the foreign objects from it.
To check if there is any further clog in the hose, you should unclamp it very gently.
Overloaded washer tube:
There is a capacity for withstanding a load for every washing machine. If you overload the washer, it will not start its wash cycle, let alone drain. The spin cycle of the washer will also get affected due to the overload.
Reduce the load:
The easiest solution to this issue is to fill the washer tube only ¾th of its maximum capacity. However, you can also solve this issue by redistributing the clothes manually.
Not spinning
Poor load distribution:
The washer tube basically rotates to wash every cloth and every part of the clothes properly. However, if the load distribution of the cloths inside the washer tube is poor it won’t be able to spin.
This mainly happens if heavier clothes accumulate in one part of the washer and the other part remains light. In this case, the washer tube cannot produce a rough rotating speed to spin properly, stopping the washer’s spinning function.
Redistribute the load:
You can fix this issue by distributing the heavier clothes uniformly inside the washer tube. If the washer tube is overloaded, you can also take out some items to make it spin well again.
Problem in lid switch:
If the lid switch is not closed correctly, the Maytag centennial washer will not start spinning. The lid switch might not close correctly if its is damaged or faulty.
Close the lid switch properly:
To solve this problem and make the unit spin again, you should press the lid switch properly. You should also check if the unit is not defective and replace it if it is so.
Defective drive belt:
The washer tube in a Maytag centennial washer basically spins with the help of the drive belt.
This belt remains around the washer tube and helps it to rotate when the wash cycle starts. If the drive belt of the Maytag washing machine is defective, it will stop spinning until it is repaired.
Replace the drive belt:
You can tighten the drive belt if it has become loose by repositioning it. If the drive belt is damaged, then you should replace it instead of repairing it.
How do I force my Maytag centennial washer to drain?
Force draining a Maytag centennial washer is not as complicated as it may seem to you at first. You can do it quite easily in a fairly short period of time. You will just need to do it in the right way to prevent any damage to the unit.
Have a look at how you can force your Maytag centennial washer to drain.
Unplug the washer:
You should unplug your washing machine so that you don’t get electrocuted while draining the unit manually.
To turn off and unplug the Maytag centennial washer, you should pull it away from the wall. It will make the process easier and effortless for you.
Turn off the water connection:
Before forcing your Maytag centennial washer to drain, you should make sure that no new water gets into the washer. So, to ensure it you should turn off the unit’s water connection.
Manually remove the water:
If the unit is not draining on its own, you will have to manually drain it. To durian it manually, you can scoop the water into a bowl or a bucket. You can also pull out the water using a mop or a cloth.
Empty the drain hose:
The drain hose of the Maytag centennial washer usually directs water to a wall drain or a floor drain. To drain out the washer forcefully, you should unhook the drain hose’s customary location and make it drain by pointing it into a bowl or bucket.
How do I get my Maytag centennial washer to spin?
Getting your Maytag centennial washer to spin again after a malfunction can be somewhat tricky. You will have to do it with the right method to ensure that it spins correctly and cleans the clothes properly.
Let’s find out how you can get your Maytag centennial washer to spin.
Turn the washer off:
Firstly, you should turn off the Maytag centennial washer so that you don’t face any electrical accidents. You can pull the unit away from the wall to get access to the plug easily.
Close the lid switch correctly:
One of the main reasons for the Maytag centennial washer to stop spinning is a defective or open lid switch. By closing the lid switch properly, you can make the washer spin.
If the washer doesn’t start to spin even after closing the lid, then it might be because of the defective lid switch. In this case, you will have to replace the lid switch to make it spin again.
Maintain load balance:
The washer tube can also stop spinning due to uneven load. By maintaining the load balance, you can make the washer spin again.
Final Thoughts
The Maytag centennial washer can stop spinning due to a faulty lid switch and unabated load in the washer tub. This washer can stop draining if the drain hose or drain pump gets clogged by lint and foreign items. However, you can make the unit start to drain and spin again quite effortlessly.