Having issues with your Kenmore washer becomes a hassle, as you need to deal with a heck ton of laundry and a washer that is malfunctioning. If you own a Kenmore washer model 110 that won’t spin, and you’re looking for solutions then keep reading.
Today we will have a detailed discussion on why your Kenmore washer model 110 won’t start. Most of the issues are minor, however, the solutions are simple too. Therefore, stay with us till the end.
Why would a Kenmore washer model 110 not spin?
There are multiple reasons behind your Kenmore washer model 110 not spinning. However, one of the common reasons behind not spinning is selecting incorrect spin speed. Additionally, most of these issues can be solved easily and without the assistance of an expert.
Most washers spin at the average speed of 1,000-1800 times per minute which is considered RPM. If the RPM of your washer drops or it stops spinning, you will have to consider there is some issue with the agitator that is preventing it from spinning.
There are multiple reasons why your Kenmore washer is not spinning.
Here are a few reasons why:
Assessing excessive load:
Although it is pretty much always ignored, a washer can only take a minimal amount of clothes. This helps the washer to spin smoothly. The fact will surprise you when you will come to know how many homeowners force their washers to take excessive wash loads.
Therefore, the washers end up dismantling and tend to replace the parts that are working well. However, try not to overload your washers.
Drain pump issue:
One of the most common reasons behind your washer stopping spinning is an unclean drain pump. Washers cannot perform well if their pumps are not clean.
If there is a blockage in the drain pump, the washer cannot dump the wastewater and therefore it cannot spin well. To get rid of this issue, you will need to clean the pump manually.
Random underlying issue:
If you have checked the washer and it’s neither of the above-mentioned issues, then your washer might need a replacement. However, before you replace anything, check the door latch, drive motor, lid switch, and other sensitive parts that have a chance to malfunction.
You can also consult a professional if you are facing severe issues regarding the spin of your washer.
Does a Kenmore washer model 110 have a reset button?
A Kenmore washer model 110 does not have a reset button. However, they can be easily reset. Quick troubleshooting can always be the solution for minor issues. Kenmore washers do not come with a reset button, but they can be reset in very simple steps.
Kenmore washers are well known for their durability. If your Kenmore washer model 110 is not spinning you can try a quick reset and check if the issue is resolved.
However, you may also need to factory reset your washer. This will lead your washer to be set back to the washer default factory mode.
Additionally, keep in mind that this is also a simple step you can follow to resolve the minor issues or troubleshoot your Kenmore washer.
How do I fix a Kenmore washer model 110 that won’t spin?
Different issues require different sorts of repairing. However, some issues are quite simple and can be easily resolved.
Here are a few things you can do to fix your Kenmore model 110 that won’t spin:
Checking the lid switch assembly:
The lid switch assembly of the washer stops the washer from working when the lid is not closed. If the switch fails for some reason, the washer will not spin.
To check if the lid is okay, use a multimeter to check the lid. If the lid switch does not have any sorts of continuity signs, then it needs replacement.
Checking the drive belt:
The drive belt is an essential part of the washer. If your drive is loose on the pulleys or it is broken, you will need to replace it.
Fixing the motor coupling:
Motors of the washer connect it with the mechanical transmission. If your washer is overloaded, the motor coupling fails to protect both your motor and the transmission.
However, it can also malfunction due to normal wear. Additionally, inspect the motor coupling and if it is broken then you may need to replace it.
How do you reset a Kenmore washer model 110?
Resetting a Kenmore washer model 110 can help you resolve simple troubleshooting or malfunctions.
Here are a few ways how you can reset a Kenmore washer model 110:
Doing a hard reset:
The first method that you can try is to do a hard reset. To hard reset, you just simply unplug the washer and then wait for at least 30 secs before plugging it back in.
A hard reset will force the circuit to shut down for enough duration so that the sequences can perform perfectly.
Doing a heated dry reset:
If hard resetting does not help you can try a heated dry reset for your washer. The heated dry reset is something that works for most Kenmore washers.
To perform a heated dry reset you will need to press the heated dry button on your washer and then the normal wash button. Repeat the sequence. After you have pressed them four times, close and latch the washer.
This forces the washer to perform a short cycle which allows the machine to reset.
How do I get my Kenmore washer model 110 to spin?
If your Kenmore washer stops spinning, there can be multiple reasons behind it.
Here are a few things you can do to start your washer if it stops spinning:
Checking wash cycle and spin setting:
There can be multiple reasons behind your washer, not spinning. Some washers are manufactured to have gentle cycles which tend to run longer.
Spin settings can be changed if required. Some models will allow you to control the spinning speed. Starting the cycle isn’t enough, you need to ensure you have selected the right spinning mode. Otherwise, the washer won’t spin.
Ensuring the wash load is properly sized:
Every washer has a limit of how much load you can put in one wash. Therefore, you should avoid putting a large amount of load at once.
When you are loading make sure you are not overloading the wash with large pieces of clothes like bedsheets and towels. However, if you need to wash them, wash them in a separate cycle. If the washer is not balanced, the agitator becomes too heavy to spin.
If the washers are filled with too much cloth, it gets tougher for the washer to work and loses its energy.
Replacing the defective lid switch assembly:
A defective lid switch assembly can stop your washer from spinning during wash cycles. If the lid is open, your washer will not start.
When the lid is not safely closed, it stops the washer to spin as the control panel acts according to the safety device.
However, if your washer doesn’t start to spin after you close the lid, then make sure that it is not obstructed by anything. Try to check the lid with a multimeter to ensure that it is working properly.
How do you run a diagnostic test on a Kenmore washer model 110?
When you press the ‘start’ button, nothing happens. So, you’re wondering how you run a diagnostic test on a Kenmore washer model 110.
You can run a diagnostic test on your washer easily. Firstly, make sure the washer is completely empty. Then push the ‘on/start’ button.
Then simply, press ‘Drain/Spin’. Once you’re done, select ‘No spin’ by touching ‘SPIN SPEED’.
Press and hold ‘PreWash’ options. Repeatedly push it for 4 times in 5-10 seconds. However, if there is no ‘pre-wash’ option, then you can do the same with the ‘RINSE’ option for 4 times within 5-10 seconds.
Once you have done all these, you will notice C:00 will light up and the diagnostic should start.
Final Thoughts
There can be multiple reasons why your Kenmore Washer will not spin. Most common reason behind the washer not spinning is the drainage being clogged. Other reasons like overloading the washer will also stop it from spinning. However, most of the issues have simple solutions or need to be replaced.