Most homes have a washing machine, which is an appliance for cleaning clothes. This term usually refers to machines that clean with water, as opposed to ultrasonic cleaners or dry cleaning, which use other types of cleaning fluids and are usually done by companies that specialize in this field.
Moreover, laundry detergent usually comes in liquid or powder form. It is put into the washing water before starting the cycle.
There are many brands, both domestic and international, that can make this kind of washing machine. Besides, one brand that does this is Hotpoint. This allows for a pleasant and effective experience when washing clothes.
When you use a Hotpoint product, you can enjoy a variety of benefit that makes things easier for you. In addition to that, we will also try to find the reason why the Hotpoint washer isn’t draining or spinning. So, let’s get started.
Hotpoint washer not draining or spinning
Simply put, the primary cause of your Hotpoint washer not draining or spinning is the presence of dirt. A drainage issue may be to blame for your Hotpoint washer’s inability to spin. And, if your Hotpoint washing machine has stopped spinning, the common cause is an obstruction within the machine.
Hotpoint manufactures a wide range of high-quality washing machines that are designed to keep working even after extensive use.
There are numerous reasons why your washing machine may no longer be draining and spinning, which is the issue you are experiencing.
If the water in your Hotpoint washer will not drain, it is most likely due to a clog somewhere inside the machine. If the water in your Hotpoint washer won’t drain, it’s most likely due to a clog somewhere inside the machine.
Not draining
The water in your Hotpoint washer is most likely clogged, and this is what is preventing it from draining.
Front-load
Lid switch assembly problem:
A front-loading washing machine’s switch assembly determines whether the lid is open, and a lock keeps it closed while in use.
Components of the lid switch and lock can malfunction. The load won’t spin and the washer won’t drain if the lid doesn’t lock.
Solution:
If your washing machine’s lid switch or lock doesn’t work, a technician should inspect it. Sometimes the lock assembly or switch must be replaced.
Any front-loading washer issue can cause havoc. A well-maintained washer will avoid draining issues.
Incorrectly leveled Hotpoint Washer:
It’s possible that your washer doesn’t spin because it wasn’t set up on a level surface.
When the spin cycle is about to start, the washer will notice that the load isn’t balanced and won’t start the cycle. Most washers can be leveled by using a spirit level and adjusting the feet.
Solution:
Even if your washing machine looks level, the problem could be caused by a surface that isn’t straight. An uneven surface, like a warped wooden floor or uneven tiles, can make it hard for a washer to balance itself.
Top-load
Drain height is incorrect:
The rate at which your washing machine drains is going to slow down as the height of the drainpipe increases.
If you have placed your washing machine at a height that is too high from the floor, it is possible that the machine will not be able to pump water out or will drain very slowly.
Solution:
Make sure to check the instructions that came with your product for the correct way to install the drain pipe and the required height.
Drain hose Is blocked:
Dust in the drain hose can prevent your washer from draining. A coiled or twisted drain hose can obstruct water flow. Objects or clothing can occasionally clog the internal hose. Repair a kinked hose behind the washer.
Solution:
To get to the hose, open the washer by removing the appropriate panel and then opening the washer.
If you disconnect the hose, a significant amount of water will most likely flow out. If this does not resolve the problem, unplug the hose and thoroughly clean it to remove any residue.
Not spinning
If the drum on your Hotpoint washing machine has stopped spinning, the problem is almost certainly caused by a clog within the machine itself.
Front-load:
Imbalance in the washer’s load:
A washing machine that is not balanced is a common cause of it not spinning. Unbalanced loads prevent the spin cycle from starting, potentially causing machine damage.
The load becomes unstable if the washer is under or overloaded, and the spin cycle will not begin.
Solution:
If your Hotpoint washer isn’t spinning, you can easily fix the problem by moving the load around.
If you only have a few things in the washing machine, try adding a few towels to help spread out the weight. If the machine is too full, take some things out so that there is more space.
Failed door latch:
The washer door latch makes sure that the seal is tight. If the washer is broken or broken down, it won’t start or spin.
Solution:
You can visually inspect the door latch for damage or check its functionality with a multimeter. If there is a lack of continuity or visible damage, the door latch assembly must be replaced.
Top-load
Drain filter is uncleaned:
The inability of your Hotpoint washer to spin could also be caused by a drainage issue.
Solution:
The drain filter must be cleaned. The filter can be found in the washer’s instruction manual.
Clean the pump blade and drain filter of lint and dirt. Then, modify the filter. To clean the washer tub, run it through a cycle with hot water and no detergent.
Switch Assembly:
The door lock keeps the washer door shut while it is being used. The washer can start working as soon as the door is shut. If the door is not latched shut, the door switch will stop the washer from running.
The washer won’t start or spin if the door lock doesn’t work right. The door lock can break in either its mechanical or electrical parts.
Solution:
Check the door lock. Replace a broken or malfunctioning door lock. Examine your washer’s wiring diagram and use a multimeter to test each door lock switch for continuity to determine if it’s electrical. Change a broken switch.
How do I drain the water from my Hotpoint washing machine manually?
There are many things that can go wrong with the way your washer drains. You might have to get rid of the water by hand. Let’s see what we can do in this situation. You can use a number of tricks.
Prepare a container:
Prepare a place to put the water that comes out of the tank. Please keep in mind that there will be a lot of fluids and that you will need a lot of them.
Take the filter off. The water should get out fast. When the flow rate diminishes, tilt the machine forward and attempt to drain everything to the end.
Unscrew the filter:
Then you have to unscrew the filter, but the water might not go out. The pipe is therefore clogged.
Sometimes, all you have to do is move it a little bit and the liquid will start to flow. If not, it needs to be cleaned before it can be drained.
Lower the hose:
If what you did didn’t change anything and the water doesn’t drain out of the tank, you can lower the hose inside and pour the water into the container below.
How do you reset a Hotpoint washer that won’t spin?
Hotpoint washers have digital settings. Hotpoint dishwasher problems can be caused by several factors. Even if you’ve fixed the mechanical problem, reset your Hotpoint dishwasher. Here’s how to reset a Hotpoint washer that’s not spinning properly.
Locate the power button:
Find the button that turns the device on or off as your first order of business. It has the words “On/Off” written on it.
If you can locate the machine’s control panel, then completing the task will not be difficult for you. Simply because it is located to the left of the panel.
Press the button:
Then you need to press the button that toggles the light on and off. You need to keep your grip on it for a few seconds. You should do so for at least 3 – 4 seconds.
Release the button:
After three seconds, you may then release the button. Thus your machine is reset.
Unplugging your Hotpoint dishwasher also works. This works if the on/off button doesn’t. First, turn off your Hotpoint dishwasher. Then disable it. Unplug it for 1 minute.
Final Thoughts
The dirt in your Hotpoint washing machine prevents the machine from draining or spinning. That is the most basic explanation. It’s possible that a drainage issue is preventing your Hotpoint washing machine from spinning. A blockage is the most common cause of a Hotpoint washing machine not working.