When it comes to electronic appliances, Frigidaire is one of the most reliable brands.
Frigidaire designs some of the best performing dryers, which are, not only energy efficient but also come with versatile washing and cycling options.
However, like most other dryers, Frigidaire dryers can also be quite noisy. Depending on the type of noise, you’d want to fix the appliance.
Frigidaire dryer making noise
Your Frigidaire dryer may be making noises for several reasons. If the dryer is making squeaky, crinkling noises, it is due to damaged pulleys, bearings, rollers, or gliders. Imbalance in the dryer would make knocking and banging sounds. A broken drive belt can cause grinding or rattling sounds.
The different type of noise that a Frigidaire dryer makes indicates a different kind of problem that needs to be addressed. Here are the several types of noise that you can expect to hear from the dryer brand and solutions to fix it:
Rattling noise:
If there are foreign objects inside the drum along with the load, you can expect a rattling noise when the drum is moving. There could be objects that fell out of a pocket and landed below the lint screen.
Other than that, rattle noise can be caused by an unleveled dryer that needs to be adjusted or a dryer kept too close to another item.
Solution:
To ensure there are no solid objects inside, you would need to empty the pockets and get rid of any coins, and belts.
Additionally, check the lint screen for objects lying around it. You may want to level up the dryer and keep space around it.
Grinding noise:
The two primary reasons why Frigidaire dryer may make grinding noises are worn-out drum glides and rollers or drum bearings.
The grinding noise occurs when one component, upon movement, rubs against another surface of the appliance. For instance, the bearings can run against the casing to make such distinctive noises.
Solution:
You would need to unplug the dryer as soon as you hear grinding noises. You can access the rollers or bearings from the front panel.
Remove the worn-out component to replace it with a new one. In the case of bearings, be sure to disassemble couplings, belts, and drums before.
Squeaking or screeching noise:
When a Frigidaire dryer is making a squealing or screeching noise, it would due to a lack of lubrication at the idler pulley.
A damaged or worn-out drum bearings or rollers can also make loud squeaking noises. Malfunctioning drive belts and glides also make for a squeaky Frigidaire dryer.
Solution:
If your idler pulley is what needs greasing, you would need to add enough grease for it to stop squeaking.
However, if the pulley, bearing, or rollers are depreciated, you would need to buy new ones along with kits to install into the dryer.
Scraping noise:
A scraping noise from a Frigidaire dryer is a clear signal that the blower wheel is either faulty, broken, or simply stuck.
Additionally, sapped and strained bearing glides can also cause scraping noise. Hard objects getting stuck in between the cabinet and front seal also make scraping noises.
Solution:
Whenever you notice a scraping sound, you should immediately turn off the dryer.
Check the area between the seal and cabinet for objects. If it is all clear, opt to replace or grease the blower wheels or glides accordingly.
Clunking noise:
The dryer’s drum rollers are the main culprit when it comes to clunking noises from a Frigidaire dryer.
This could be due to a lack of grease, to begin with. But the same sound can be created when the rollers become flattened or when the drive belt becomes worn out.
Solution:
At first you would need to make sure that the drum rollers are properly greased. If not, you would need to clean the rollers because greasing them with a good quality lubricate.
Other than that, if you notice signs of wear in the belt, replace it with a new one.
Banging noise:
Whenever you hear banging noises from the Frigidaire dryer, you would have to assume that there is an issue of balance.
This means that something inside the dryer has caused the drums to wobble out of balance. This could be too much load or a dryer that is not standing leveled on the ground.
Solution:
You may have to switch off a banging dryer first with it becomes too violent.
Check if the load you have put is too much. To maintain balance, it is important to put a balanced load.
Avoid putting large wet comforters, for instance. You can adjust the position of the dryer and make the legs stand leveled on ground
Thumping noise:
If a Frigidaire dryer is making a thumbing noise, it could be because the dryer has been sitting idle for some time.
A thumping noise is an indicator of a roller being flattened between the point of contact with the drum. This sound does not persist after a few rounds of operation.
Solution:
To fix a thumping noise you would need to turn on the dryer and let it operate on a normal cycle.
The thumping would gradually diminish as the flatness on the rollers go away. Run the dryer a few times to let the rollers regain their shapes.
Humming or buzzing noise:
In a Frigidaire dryer, a humming or buzzing sound indicates that the drum is struggling to spin.
The most common reason for this is usually a damaged drive belt but worn-out idler pulleys or dryer rollers can also cause humming noises since they stop the dryer from spinning.
Solution:
If you have a worn out or damaged dryer belt, you would need to take out the old one and replace it with a new drive belt. Similarly inspect the pulleys, bearings drum rollers, and axles to replace the frayed ones.
Rumbling noise:
Rumbling sounds in a Frigidaire dryer is not the most common but when it makes such sounds you would have to check with the dryer’s support wheels.
The support wheels on the drums are constantly rotating and are also subject to large amounts of weight. The wheels can become out of shape and worn out over time to cause such noises.
Solution:
You may want to unplug the dryer and stop using it immediately as using a rumbling dryer means the wheels are wearing off fast. Checking the wheels, you would need to replace them with new ones.
Clicking noise:
A clicking or ticking noise is likely to come from a Frigidaire dryer when there is a drive belt that has worn out or cracked.
The belt may become loose or broken to cause the drum to rotate out of alignment. Foreign objects colliding inside the drum may also cause a clicking sound.
Solution:
If you hear a clicking sound you may want to check the drive belt first. If you notice signs of damage, pull out the old drive belt and replace it with a new one.
It is also wise to manually rotate the drum before trying a repair.
Knocking noise:
Hearing a knocking noise from a Frigidaire dryer should not be alarming because it mostly relates to the balance of the dryer.
Putting a heavy, wet comforter can put the drums out of balance. If the load is not balanced or too heavy, the drums are unable to rotate freely, causing a knocking sound.
Solution:
Whenever you put the load into the dryer, try to make sure that you do not put large clothing all at once. You can also manually rotate the drums to adjust the balance.
Is Frigidaire dryer making noise common?
Like most dryers, it is common for Frigidaire dryers to make noises after years of use. As years go by, dryers get used regularly.
Most segments like the bearings, support wheels, glides or pulleys, and the belt are constantly moving, making them depreciate a little each time.
Due to the wear and tear of these components, and sometimes due to lack of grease, the fryer tends to become noisy.
Although not considered to be normal in a working dryer, humming noises and squeaking or screeching noises in Frigidaire dryers are more common. You can still expect clicking or scraping noises if there are objects inside the drum or on the lint trap.
Grinding or rattling noises are less common because these are mostly caused by more serious damage. Frigidaire dryers can be easily maintained because the components and kits are more affordable than other brands.
Final Thoughts
One of the preceding reasons that a Frigidaire dryer makes noises relates to the damage and depreciation of its components. If the idler pulleys, drive belt, or bearings are worn out, you can expect to hear squeaking, grinding, humming, or even clicking sounds. It can be fixed by replacing the part.